3D Mol Similar

Bicalutamide

: Iupac Name：(2R)-N-[4-cyano-3-(trifluoromethyl)phenyl]-3-(4-fluorophenyl)sulfonyl-2-
hydroxy-2-methylpropanamide; CAS No.: 90357-06-5; Molecular Weight：430.373373; Modify Date.: 2022-11-07 20:14; Introduction:
Bicalutamide, with the chemical formula C18H14F4N2O4S and CAS registry number 90357-06-5, is a compound used in the treatment of prostate cancer. It belongs to the class of nonsteroidal antiandrogens and acts by blocking the effects of androgens, which are male hormones that promote the growth of prostate cancer cells. Bicalutamide is typically administered orally as a tablet and is often used in combination with other medications. Common side effects include hot flashes, breast tenderness, and fatigue. It is important to note that the information provided here is a general overview and should not replace professional medical advice. Please consult a healthcare provider for specific information regarding the use and potential side effects of Bicalutamide.
View more+

Request For Quotation

1. Names and Identifiers

: 1.1 Name; Bicalutamide; 1.2 Synonyms; (+-)--2-hydroxy-2-methyl (1E,2R)-N-[4-Cyano-3-(trifluoromethyl)phenyl]-3-[(4-fluorophenyl)sulfonyl]-2-hydroxy-2-methylpropanimidic acid (2R)-N-[4-Cyano-3-(trifluoromethyl)phenyl]-3-[(4-fluorophenyl)sulfonyl]-2-hydroxy-2-methylpropanamide 25mg Bicaiutamide Bicalutamide (Subject to patent free) BicalutaMide API CASODEX Cosudex ICI-176334 MFCD00869971 N-[(4-CYANO-3-TRIFLUOROMETHYL)PHENYL]-3-[(4-FLUOROPHENYL)SULFONYL]-2-HYDROXY-2-METHYLPROPANAMIDE N-[4-CYANO-3-(TRIFLUOROMETHYL)PHENYL]-3-[(4-FLUOROPHENYL)SULFONYL]-2-HYDROXY-2-METHYLPROPIONANILIDE ODEX Propanamide, N-[4-cyano-3-(trifluoromethyl)phenyl]-3-[(4-fluorophenyl)sulfonyl]-2-hydroxy-2-methyl-, (2R)- propanamide,n-(4-cyano-3-(trifluoromethyl)phenyl)-3-((4-fluorophenyl)sulfonyl) Propanimidic acid, N-[4-cyano-3-(trifluoromethyl)phenyl]-3-[(4-fluorophenyl)sulfonyl]-2-hydroxy-2-methyl-, (1E,2R)- R-bicalutamide R-Bicalutimide; View all

1.3 CAS No.: 90357-06-5

1.4 CID: 2375

1.5 EINECS(EC#): 618-534-3

1.6 Molecular Formula: C18H14F4N2O4S (isomer)

1.7 Inchi: InChI=1S/C18H14F4N2O4S/c1-17(26,10-29(27,28)14-6-3-12(19)4-7-14)16(25)24-13-5-2-11(9-23)15(8-13)18(20,21)22/h2-8,26H,10H2,1H3,(H,24,25)

1.8 InChIkey: LKJPYSCBVHEWIU-UHFFFAOYSA-N

1.9 Canonical Smiles: CC(CS(=O)(=O)C1=CC=C(C=C1)F)(C(=O)NC2=CC(=C(C=C2)C#N)C(F)(F)F)O

1.10 Isomers Smiles: CC(CS(=O)(=O)C1=CC=C(C=C1)F)(C(=O)NC2=CC(=C(C=C2)C#N)C(F)(F)F)O

2. Properties

2.1 Density: 1.52

2.1 Melting point: 191-193℃

2.1 Boiling point: 650.3 °C at 760 mmHg

2.1 Refractive index: 1.577

2.1 Flash Point: 347.1 °C

2.1 Precise Quality: 430.06100

2.1 PSA: 115.64000

2.1 logP: 4.03338

2.1 Solubility: DMSO: >5mg/mL

2.2 Λmax: 270nm(CH3CN)(lit.)

2.3 Appearance: off-white crystalline solid

2.4 Storage: Store at RT

2.5 Color/Form: White to Yellow Solid

2.6 pKa: 11.49±0.29(Predicted)

2.7 Water Solubility: Insoluble in water

2.8 StorageTemp: 2-8°C

3. Use and Manufacturing

3.1 Definition: ChEBI: A sulfone that is an oral non-steroidal antiandrogen used in the treatment of prostate cancer and hirsutism.

3.2 General Description: Bicalutamide, N-4-cyano-3-(trifluoromethyl)phenyl-3-[(4-fluorophenyl)sulfonyl]-2-hydroxy-2-methyl-propanamide (Casodex), is more potent than flutamideand has a much longer half-life (5.9 days vs. 6 hoursfor hydroxyflutamide). Because of the longer half-life, bicalutamideis used for once-a-day (50 mg) treatment of advancedprostate cancer. Bicalutamide is available as aracemic mixture, but both animal and human studies withthe AR show that the R-enantiomer has higher affinity forthe AR than the S-enantiomer.

3.3 History: Bicalutamide was discovered in the 1980s by Tucker et al. at Imperial Chemical Industries (now AstraZeneca). Based on previous works on flutamide, key structural features required for a strong anti-androgenic activity include the presence of an electron-poor aromatic ring, attached to an amide moiety. Electron-withdrawing groups at the para and the meta position of the anilide ring are beneficial for the anti-androgenic activity as compared to monosubstituted derivatives.As far as the meta position is concerned, a chloro or trifluoromethyl substituent is the best choice. Nitro and cyano groups are the best substituents at the para position. Replacement of themethyl group at the tertiary carbinol center by a trifluoromethyl group resulted in compounds with agonistic activity. In contrast to flutamide, the amide moiety of bicalutamide was extended by a sulfur linker with a second aromatic portion. The sulfanyl, sulfinyl, and sulfonyl analogues showed the same activity.The sulfanyl group was found to be oxidized to the active metabolite sulfonyl, thus indicating the sulfonyl derivative as the biologically active entity. An unsubstituted phenylsulfonyl moiety at the eastern part, or corresponding derivatives with small substituents such as fluoro at the para position, seemed to be the best in terms of anti-androgenic activity.; View all

3.4 Usage: V1 taking anti-androgens drug. Prostate cancer therapeutic agents for the treatment of advanced prostate cancer.

4. Safety and Handling

4.1 Symbol: GHS07

4.1 Hazard Codes: Xi

4.1 Signal Word: Warning

4.1 Risk Statements: R36/37/38

4.1 Safety Statements: 26-36

4.1 Exposure Standards and Regulations: The Approved Drug Products with Therapeutic Equivalence Evaluations List identifies currently marketed prescription drug products, incl bicalutamide, approved on the basis of safety and effectiveness by FDA under sections 505 of the Federal Food, Drug, and Cosmetic Act.

4.2 Packing Group: III

4.2 Octanol/Water Partition Coefficient: log Kow = 2.8 (est)

4.3 Other Preventative Measures: /PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Accidental contamination of the health-care environment, resulting in exposure of personnel, patients, visitors, and family members to hazardous substances, is prevented by maintaining the physical integrity and security of packages of hazardous drugs. 1. Access to all areas where hazardous drugs are stored is limited to specified authorized staff. 2. A method should be present for identifying to personnel those drugs that require special precautions (eg, cytotoxics). One way to accomplish this is to apply appropriate warning labels to all hazardous drug containers, shelves, and bins where the drug products are stored. ... 3. A method of identifying, for patients and family members, those drugs that require special precautions in the home should be in place. This may be accomplished in the health-care setting, by providing specific labeling for discharge medications, along with written instructions. 4. Methods for identifying shipping cartons of hazardous drugs should be required from manufacturers and distributors of these drugs. 5. Written procedures for handling damaged packages of hazardous drugs should be maintained. Personnel involved in shipping and receiving hazardous drugs should be trained in these procedures, including the proper use of protective garments and equipment. Damaged shipping cartons of hazardous drugs should be received and opened in an isolated area (eg, in a laboratory fume hood, if available, not in a vertical laminar airflow biological safety cabinet used for preparing sterile products). /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Facilities (eg, shelves, carts, counters, and trays) for storing hazardous drugs are designed to prevent breakage and to limit contamination in the event of leakage. Bins, shelves with barriers at the front, or other design features that reduce the chance of drug containers falling to the floor should be used. Hazardous drugs requiring refrigeration should be stored separately from nonhazardous drugs in individual bins designed to prevent breakage and to contain leakage. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Until the reproductive risks (or lack thereof) associated with handling hazardous drugs within a safety program have been substantiated, staff who are pregnant or breast-feeding should be allowed to avoid contact with these drugs. Policies should be in effect that provide these individuals with alternative tasks or responsibilities if they so desire. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ The pharmacy should provide access to information on toxicity, treatment of acute exposure (if available), chemical inactivators, solubility and stability of hazardous drugs (including investigational agents) used in the workplace. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Appropriate engineering controls should be in place to protect the drug product from microbial contamination and to protect personnel and the environment from the potential hazards of the product. These engineering controls should be maintained according to applicable regulations and standards. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Biological safety cabinets should be cleaned and disinfected regularly to ensure a proper environment for preparation of sterile products. For routine cleanups of surfaces between decontaminations, water should be used (for injection or irrigation) with or without a small amount of cleaner. If the contamination is soluble only in alcohol, then 70% isopropyl or ethyl alcohol may be used in addition to the cleaner. In general, alcohol is not a good cleaner, only a disinfectant, and its use in a biohazard cabinet should be limited. The biohazard cabinet should be disinfected with 70% alcohol before any aseptic manipulation is begun. The excessive use of alcohol should be avoided in biohazard cabinets where air is recirculated ... because alcohol vapors may build up in the cabinet. A lint-free, plastic-backed disposable liner may be used in the biological safety cabinet to facilitate spill cleanup. ... If used, the liner should be changed frequently ... /or/ whenever it is overtly contaminated. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ The biological safety cabinets should be decontaminated on a regular basis (ideally at least weekly) and whenever there is a spill or the biological safety cabinet is moved or serviced, including for certification. ... Currently, no single reagent will deactivate all known hazardous drugs; therefore, decontamination of a biological safety cabinet used for such drugs is limited to removal of contamination from a nondisposable surface (the cabinet) to a disposable surface (eg, gauze or towels) by use of a good cleaning agent that removes chemicals from stainless steel. The cleaning agent selected should have a pH approximating that of soap and be appropriate for stainless steel. Cleaners containing chemicals such as quaternary ammonium compounds should be used with caution, because they may be hazardous to humans and their vapors may build up in any biological safety cabinet where air is recirculated. Similar caution should be used with any pressurized aerosol cleaner; spraying a pressurized aerosol into a biological safety cabinet may disrupt the protective containment airflow, damage the high efficiency particulate air filter, and cause an accumulation of the propellant within a biological safety cabinet where air is recirculated, resulting in a fire and explosion hazard. During decontamination, the operator should wear a disposable closed front gown, disposable latex gloves covered by disposable utility gloves, safety glasses or goggles, a hair covering, and a disposable respirator, because the glass shield of the biological safety cabinet occasionally must be lifted. The blower must be left on, and only heavy toweling or gauze should be used in the biological safety cabinet to prevent it from being "sucked" up the plenum and into the high efficiency particulate air filter. Decontamination should be done from top to bottom (areas of lesser contamination to greater) by applying the cleaner, scrubbing, and rinsing thoroughly with distilled or deionized water. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ The high efficiency particulate air filters /or other exhaust scrubbing system/ of the biohazard cabinet must be replaced whenever they restrict required airflow velocity or if they are overtly contaminated (eg, by a breach in technique that causes hazardous drug to be introduced onto the clean side of the supply high efficiency particulate air filter). Personnel and environmental protection must be maintained during replacement of a contaminated high efficiency particulate air filter. Because replacement of a high efficiency particulate air filter generally requires breaking the integrity of the containment aspect of the cabinet, this procedure may release contamination from the filter into the pharmacy or intravenous preparation area if carried out in an inappropriate manner. Before replacement of a high efficiency particulate air filter contaminated with hazardous drugs, the biological safety cabinet service agent should be consulted for a mutually acceptable procedure for replacing and subsequently disposing of a contaminated high efficiency particulate air filter. One procedure would include moving the biological safety cabinet to a secluded area or using plastic barriers to segregate the contaminated area. Protective clothing and equipment must be used by the servicer. The biological safety cabinet should be decontaminated before filter replacement. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ During removal of gloves, ... avoid touching the inside of the glove or the skin with the contaminated glove fingers. ... The worker should wear a protective disposable gown made of lint free, low-permeability fabric with a solid front, long sleeves, and tight-fitting elastic or knit cuffs when preparing hazardous drugs. Washable garments are immediately penetrated by liquids and therefore provide little, if any protection. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ When double gloving, one glove should be placed under the gown cuff and one over. The glove-gown interface should be such that no skin on the arm or wrist is exposed. Gloves and gowns should not be worn outside the immediate preparation area. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Eyewash fountains should be available in areas where hazardous drugs are routinely handled. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Although noninjectable dosage forms of hazardous drugs contain varying proportions of drug to nondrug (nonhazardous) components, there is potential for personnel exposure and environmental contamination with the hazardous components. Procedures should be developed to avoid the release of aerosolized powder or liquid into the environment during manipulation of these drugs. Drugs designated as hazardous should be labeled or otherwise identified as such to prevent their improper handling. Tablet and capsule forms of these drugs should not be placed in automated counting machines, which subject them to stress and may introduce powdered contaminants into the work area. During routine handling of hazardous drugs and contaminated equipment, workers should wear one pair of gloves of good quality and thickness. The counting and pouring of hazardous drugs should be done carefully, and clean equipment dedicated for use with these drugs should be used. ... When hazardous drug tablets in unit-of-use packaging are being crushed, the package should be placed in a small sealable plastic bag and crushed with a spoon or pestle; caution should be used not to break the plastic bag. Disposal of unused or unusable oral or topical dosage forms of hazardous drugs should be performed in the same manner as for hazardous injectable dosage forms and waste. ... Hazardous drug work areas should have a sink (preferably with an eyewash fountain) and appropriate first aid equipment to treat accidental skin or eye contact according to the protocol. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ A distinctive warning label with an appropriate CAUTION statement should be attached to all hazardous drug materials, consistent with state laws and regulations. This would include, for example, syringes, IV containers, containers of unit-dose tablets and liquids, prescription vials and bottles, waste containers, and patient specimens that contain hazardous drugs. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Supplies of disposable gloves and gowns, safety glasses, disposable plastic-backed absorbent liners, gauze pads, hazardous waste disposal bags, hazardous drug warning labels, and puncture-resistant containers for disposal of needles and ampuls should be conveniently located for all areas where hazardous drugs are handled. Assembling a "hazardous drug preparation and administration kit" is one way to furnish nursing and medical personnel with the materials needed to reduce the risk of preparing and administering a hazardous drug. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Prospective temporary and permanent employees who may be required to work with hazardous drugs should be so notified and should receive adequate information about the policies and procedures pertaining to their use. This notification should be documented during the interview process and retained as part of the employment record for all employees. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ All personnel involved with the transportation, preparation, administration, and disposal of cytotoxic and hazardous substances should continually be updated on new or revised information on safe handling of cytotoxic and hazardous substances. Policies and procedures should be updated accordingly. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ The work area should be designed to provide easy access to those items necessary to prepare, label, and transport final products; contain all related waste; and avoid inadvertent contamination of the work area. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Each health-care setting should have an established first aid protocol for treating cases of direct contact with hazardous drugs, many of which are irritating or caustic and can cause tissue destruction. Medical care providers in each setting should be contacted for input into this protocol. The protocol should include immediate treatment measures and should specify the type and location of medical follow-up and work-injury reporting. Copies of the protocol, highlighting emergency measures, should be posted wherever hazardous drugs are routinely handled. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Only individuals trained to administer hazardous drugs should be allowed to perform this function. Training programs should contain information on the therapeutic and adverse effects of these drugs and the potential, long term health risk to personnel handling these drugs. Each individual's knowledge and technique should be evaluated before administration of these drugs. This should be done by written examination and direct observation of the individual's performance. /Antineoplastic agents/; View all

4.4 Hazard Class: 9

4.4 Hazard Declaration: H315-H319-H335

4.4 Cleanup Methods: /PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Spill kits containing all materials needed to clean up spills of hazardous drugs should be assembled or purchased. These kits should be readily available in all areas where hazardous drugs are routinely handled. If hazardous drugs are being prepared or administered in a nonroutine area (home setting or unusual patient-care area), a spill kit should be obtained by the drug handler. The kit should include two pairs of disposable gloves (one outer pair of utility gloves and one inner latex pair); low-permeability, disposable protective garments (coveralls or gown and shoe covers); safety glasses or splash goggles; respirator; absorbent, plastic-backed sheets or spill pads; disposable toweling; at least 2 sealable thick plastic hazardous waste disposal bags (prelabeled with an appropriate warning label); a disposable scoop for collecting glass fragments; and a puncture-resistant container for glass fragments. All individuals who routinely handle hazardous drugs must be trained in proper spill management and cleanup procedures. Spills and breakages must be cleaned up immediately according to the following procedures. If the spill is not located in a confined space, the spill area should be identified and other people should be prevented from approaching and spreading the contamination. Wearing protective apparel from the spill kit, workers should remove any broken glass fragments and place them in the puncture-resistant container. Liquids should be absorbed with a spill pad; powder should be removed with damp disposable gauze pads or soft toweling. The hazardous material should be completely removed and the area rinsed with water and then cleaned with detergent. The spill cleanup should proceed progressively from areas of lesser to greater contamination. The detergent should be thoroughly rinsed and removed. All contaminated materials should be placed in the disposal bags provided and sealed and transported to a designated containment receptacle. Spills occurring in the biohazard cabinet should be cleaned up immediately; a spill kit should be used if the volume exceeds 150 ml or the contents of one drug vial or ampule. If there is broken glass, utility gloves should be worn to remove it and place it in the puncture-resistant container located in the biohazard cabinet. The biological safety cabinet, including the drain spillage trough, should be thoroughly cleaned. If the spill is not easily and thoroughly contained, the biological safety cabinet should be decontaminated after cleanup. If the spill contaminates the high efficiency particulate air filter, use of the biological safety cabinet should be suspended until the cabinet has been decontaminated and the high efficiency particulate air filter replaced. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ If hazardous drugs are routinely prepared or administered in carpeted areas, special equipment is necessary to remove the spill. Absorbent powder should be substituted for pads or sheets and left in place on the spill for the time recommended by the manufacturer. The powder should then be picked up with a small vacuum unit reserved for hazardous drug cleanup. The carpet should then be cleaned according to usual procedures. The vacuum bag should be removed and discarded or cleaned, and the exterior of the vacuum cleaner should be washed with detergent and rinsed before being covered and stored. The contaminated powder should be discarded into a sealable plastic bag and segregated with other contaminated waste materials. Alternatively, inexpensive wet or dry vacuum units may be purchased for this express use and used with appropriate cleaners. All such units are contaminated, once used, and must be cleaned, stored, and ultimately discarded /properly/ ... The circumstances and handling of spills should be documented. Health-care personnel exposed during spill management should also complete an incident report or exposure form. /Antineoplastic agents/; View all

4.5 DisposalMethods: SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ All contaminated disposables should be contained in sealable bags for transfer to larger waste containers. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ All bottles must be discarded as contaminated waste after decontamination of the biohazard cabinet. All protective apparel (gown, gloves, goggles, and respirator) should be discarded as contaminated waste. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ The contaminated filters must be removed, bagged in thick plastic and prepared for disposal in a hazardous waste dump site or incinerator licensed by the Environmental Protection Agency (EPA). /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ The gown should be removed and placed in a sealable container before removal of the inner gloves. The inner gloves should be removed last and placed in the container with the gown. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Hazardous drug waste should be placed in specially marked (specifically labeled CAUTION: HAZARDOUS CHEMICAL WASTE) thick plastic bags or leakproof containers. These receptacles should be kept in all areas where the drugs are commonly used. All and only hazardous drug waste should be placed in them. Receptacles used for glass fragments, needles, and syringes should be puncture resistant. Hazardous drug waste should not be mixed with any other waste. Waste containers should be handled with uncontaminated gloves. ... Gloves, gowns, drug vials, etc, should be sealed in specially labeled (CAUTION: HAZARDOUS CHEMICAL WASTE) thick plastic bags or leakproof containers. ... All hazardous waste collected from drug preparation and patient-care areas should be held in a secure place in labeled, leakproof drums or cartons (as required by state or local regulation or disposal contractor) until disposal. This waste should be disposed of as hazardous or toxic waste in an EPA-permitted state-licensed hazardous waste incinerator. Transport to an offsite incinerator should be done by a contractor licensed to handle and transport hazardous waste. ... If access to an appropriately licensed incinerator is not available, transport to and burial in an EPA-licensed hazardous waste dump site is an acceptable alternative. While there are concerns that destruction of carcinogens by incineration may be incomplete, newer technologies and stringent licensing criteria have improved this disposal method. ... Chemical deactivation of hazardous drugs should be undertaken only by individuals who are thoroughly familiar with the chemicals and the procedures required to complete such a task. The IARC recently published a monograph describing methods for chemical destruction of some cytotoxic (antineoplastic) drugs in the laboratory setting. The chemicals and equipment described, however, are not generally found in the clinical setting, and many of the deactivating chemicals are toxic and hazardous. Most procedures require the use of a chemical fume hood. The procedures are generally difficult, and the deactivation is not always complete. Serious consideration should be given to the negative aspects of chemical deactivation before one commits to such a course of action. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Regulatory agencies such as the EPA and state solid and hazardous waste agencies and local air and water quality control boards must be consulted regarding the classification and appropriate disposal of drugs that are defined as hazardous or toxic chemicals. EPA categorizes several of the antineoplastic agents as toxic wastes, while many states are more stringent and include as carcinogens certain cytotoxic drugs and hormonal preparations. EPA also allows exemptions from toxic waste regulations for small quantity generators, whereas certain states do not. It is critical to research these regulations when disposal procedures are being established. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ If the biological safety cabinet is equipped with a drainpipe and valve, it may be used to collect rinse water. The collection vessel used must fit well around the drain valve and not allow splashing. Gauze may be used around the connection to prevent aerosol from escaping. The collection vessel must have a tight fitting cover, and all rinse water (gauze, if used) must be disposed of as contaminated waste. /Antineoplastic agents/; View all

4.6 RIDADR: OTH

4.6 Caution Statement: P261-P305 + P351 + P338

4.6 Formulations/Preparations: Formulations: Oral tablets, film-coated 50 mg Bicalutamide, Casodex by AstraZeneca

4.7 WGK Germany: 3

4.7 RTECS: TX1413500

4.7 Protective Equipment and Clothing: /PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Protective apparel: Disposable closed-front gown or coveralls, disposable utility gloves over disposable latex gloves, NIOSH-approved air-purifying half-mask respirator equipped with a high efficiency filter, and eye protection should be worn. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Class 100 clean-air work stations, both horizontal and vertical airflow (with no containment characteristics), are inappropriate engineering controls for handling hazardous drugs because they provide no personnel protection and permit environmental contamination. Although there are no engineering controls designed specifically for the safe handling of hazardous chemicals as sterile products, Class II contained vertical-flow biological safety cabinets (biohazard cabinets) have been adopted for this use. Biohazard cabinetry is, however, designed for the handling of infectious agents, not hazardous chemicals. ... Based on design, ease of use, and cost considerations, Class II contained-vertical-flow biohazard cabinetry is currently recommended for use in preparing sterile doses of hazardous drugs. Class II cabinetry design and performance specifications are defined in NSF Standard 49. Biological safety cabinets selected for use with hazardous drugs should meet NSF Standard 49 specifications to ensure the maximum protection from these engineering controls. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Workers should wear powder free, disposable surgical latex gloves of good quality when preparing hazardous drugs. Selection criteria for gloves should include thickness (especially at the fingertips where stress is the greatest), fit, length, and tactile sensation. ... The practice of double gloving is supported by research that indicates that many glove materials vary in drug permeability even within lots; therefore, double gloving is recommended. ... In general, surgical latex gloves fit better, have appropriate elasticity for double gloving and maintaining the integrity of the glove-gown interface, and have sufficient tactile sensation (even during double gloving) for stringent aseptic procedures. ... Powdered gloves should be avoided. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ Workers who are not protected by the containment environment of a biohazard cabinet should use respiratory protection when handling hazardous drugs. Respiratory protection should be an adjunct to and not a substitute for engineering controls. Surgical masks of all types provide no respiratory protection against powdered or liquid aerosols of hazardous drugs. In situations where workers may be exposed to potential eye contact with hazardous drugs, an appropriate plastic face shield or splash goggles should be worn. /Antineoplastic agents/
/PRECAUTIONS FOR ANTINEOPLASTIC AGENTS:/ During compounding of hazardous drugs (eg, crushing, dissolving, and preparing an ointment), workers should wear low permeability gowns and double gloves. Compounding should take place in a protective area such as a disposable glove box. If compounding must be done in the open, an area away from drafts and traffic must be selected, and the worker should use appropriate respiratory protection. /Antineoplastic agents/; View all

4.8 Safety: ?Bicalutamide (CAS NO.90357-06-5) is?contraindicated ,females and children? must not be given to any patient who has shown a hypersensitivity reaction to its use.?
Hazard Codes:?Xi
Risk Statements: 36/37/38?
R36/37/38:Irritating to eyes, respiratory system and skin.
Safety Statements: 26-36
?S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.?
S36:Wear suitable protective clothing.
RIDADR: 3077
HazardClass: 9
PackingGroup: III

4.9 Specification: ?Bicalutamide , its cas register number is 90357-06-5. It also can be called?Bicalutamide [USAN:INN:BAN]?; (+-)-4'-Cyano-alpha,alpha,alpha-trifluoro-3-((p-fluorophenyl)sulfonyl)-2-methyl-m-lactotoluidide ; BRN 5364666 ; CCRIS 8728 ; Casodex ; HSDB 7655 ; ICI 176334 ; UNII-A0Z3NAU9DP ; Propanamide, N-(4-cyano-3-(trifluoromethyl)phenyl)-3-((4-fluorophenyl)sulfonyl)-2-hydroxy-2-methyl-, (+-)- .It is a?off-white crystalline solid. It??is practically insoluble in water.

4.10 Toxicity

Organism	Test Type	Route	Reported Dose (Normalized Dose)	Effect	Source
dog	LD	oral	> 2gm/kg (2000mg/kg)	?	Journal of Toxicological Sciences. Vol. 22, Pg. 75, 1997.
mouse	LD	oral	> 2gm/kg (2000mg/kg)	?	Journal of Toxicological Sciences. Vol. 22, Pg. 75, 1997.
mouse	LD50	intraperitoneal	> 2gm/kg (2000mg/kg)	?	Gekkan Yakuji. Pharmaceuticals Monthly. Vol. 42, Pg. 197, 2000.
rabbit	LD50	oral	> 200mg/kg (200mg/kg)	?	Gekkan Yakuji. Pharmaceuticals Monthly. Vol. 42, Pg. 197, 2000.
rat	LD	oral	> 2gm/kg (2000mg/kg)	?	Journal of Toxicological Sciences. Vol. 22, Pg. 75, 1997.
rat	LD50	intraperitoneal	> 2gm/kg (2000mg/kg)	?	Gekkan Yakuji. Pharmaceuticals Monthly. Vol. 42, Pg. 197, 2000.

View all

5. MSDS

2.Hazard identification

2.1 Classification of the substance or mixture

Skin irritation, Category 2

Eye irritation, Category 2

Specific target organ toxicity \u2013 single exposure, Category 3

2.2 GHS label elements, including precautionary statements

Pictogram(s)
Signal word	Warning
Hazard statement(s)	H315 Causes skin irritation H319 Causes serious eye irritation H335 May cause respiratory irritation
Precautionary statement(s)
Prevention	P264 Wash ... thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area.
Response	P302+P352 IF ON SKIN: Wash with plenty of water/... P321 Specific treatment (see ... on this label). P332+P313 If skin irritation occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312 Call a POISON CENTER/doctor/\u2026if you feel unwell.
Storage	P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal	P501 Dispose of contents/container to ...

2.3 Other hazards which do not result in classification

none

View all

6. Synthesis Route

90357-06-5Total: 15 Synthesis Route

371-42-6 146 Suppliers

90357-06-5 425 Suppliers

Literatures:
Journal of Medicinal Chemistry, , vol. 31, # 5 p. 954 - 959
Yield: null

654-70-6 338 Suppliers

90357-06-5 425 Suppliers

Literatures:
Synthesis, , # 7 p. 850 - 852
Yield: null

90356-78-8 168 Suppliers

90357-06-5 425 Suppliers

Literatures:
SUN PHARMACEUTICAL INDUSTRIES LIMITED Patent: WO2007/13094 A2, 2007 ; Location in patent: Page/Page column 10 ;
Yield: ~98%

View all

7. Precursor and Product

precursor:

432-98-4

654-70-6

33599-22-3

194853-86-6

371-42-6

87310-69-8

216665-25-7

455-15-2

90357-51-0

90357-53-2

90356-78-8

937-14-4

1067225-62-0

824-80-6

369-51-7

View all

8. Other Information

8.0 Merck: 14,1200

8.1 Bicalutamide Solubility: soluble in dimethyl formamide; dissolved in tetrahydrofuran; slightly soluble in ethyl acetate and methanol; insoluble in water.

8.2 Uses: V1 taking anti-androgens drug. Prostate cancer therapeutic agents for the treatment of advanced prostate cancer.

8.3 Producing method: methyl methacrylate epoxidized to form epoxide,and then in the presence of sodium hydride reacted with fluorothiophenol to form the compound ,followed by oxidation to form compound. Then hydrolyzed to the acid,with thionyl chloride chloride as acid chloride.And finally condensation with 4-cyano-3-trifluoromethyl-aniline to obtain the product.

8.4 Chemical Properties: Off-White Crystalline Solid

8.5 History: Bicalutamide was discovered in the 1980s by Tucker et al. at Imperial Chemical Industries (now AstraZeneca). Based on previous works on flutamide, key structural features required for a strong anti-androgenic activity include the presence of an electron-poor aromatic ring, attached to an amide moiety. Electron-withdrawing groups at the para and the meta position of the anilide ring are beneficial for the anti-androgenic activity as compared to monosubstituted derivatives.As far as the meta position is concerned, a chloro or trifluoromethyl substituent is the best choice. Nitro and cyano groups are the best substituents at the para position. Replacement of themethyl group at the tertiary carbinol center by a trifluoromethyl group resulted in compounds with agonistic activity. In contrast to flutamide, the amide moiety of bicalutamide was extended by a sulfur linker with a second aromatic portion. The sulfanyl, sulfinyl, and sulfonyl analogues showed the same activity.The sulfanyl group was found to be oxidized to the active metabolite sulfonyl, thus indicating the sulfonyl derivative as the biologically active entity. An unsubstituted phenylsulfonyl moiety at the eastern part, or corresponding derivatives with small substituents such as fluoro at the para position, seemed to be the best in terms of anti-androgenic activity.; View all

8.6 Uses: adrenocortical suppressant, antineoplastic, steroid biosynthesis inhibitor

8.7 Uses: Non-steroidal peripherally active antiandrogen. Used as an antiandrogen, antineoplastic (hormonal)

8.8 Definition: ChEBI: A sulfone that is an oral non-steroidal antiandrogen used in the treatment of prostate cancer and hirsutism.

8.9 Indications: Bicalutamide was the third nonsteroidal anti-androgen that was used for the treatment of prostate cancer. Flutamide, although effective in the treatment of prostate cancer, is a pure antagonist that also affects the hypothalamus pituitary axis, thus preventing the negative feedback mechanism of androgen. Consequently, the production of LH is increased, which subsequently stimulates the synthesis of testosterone, counteracting the effectiveness of the anti-androgen. Furthermore, the half-life of the active metabolite of flutamide, hydroxyflutamide, is fairly short, and a dosing scheme of 250 mg three times daily is therefore required. The main adverse effects reported for flutamide are gynecomastia, diarrhea, and reversible liver abnormalities. Nilutamide has a longer half-life than flutamide and therefore can be administered once daily. Adverse events reported include problems with light/dark adaptation and interstitial pneumonitis. The goal that ultimately led to the discovery of bicalutamide was the identification of a novel peripherally selective anti-androgen with longer half-life than flutamide and with better tolerability as compared to both, flutamide and nilutamide.; View all

8.10 Brand name: Casodex (AstraZeneca).

8.11 Biological Activity: Orally active non-steroidal androgen receptor antagonist (IC 50 = 190 nM). Displays peripheral selectivity and does not effect serum levels of LH and testosterone. Exhibits potent anticancer activity in vivo .

8.12 Pharmacology: Bicalutamide is a competitive AR antagonist, which shows in vitro a lower affinity for the AR as compared to the synthetic androgen R1881 as well as the natural DHT. However it displays a fourfold higher affinity as compared to hydroxyflutamide as assessed by a binding assay. Bicalutamide inhibits the growth of the LNCaP/FGC prostate carcinoma cell line, in which hydroxyflutamide was not effective at all. In vivo anti-androgenic activity of bicalutamide was confirmed by dose-dependent weight reduction of the seminal vesicles and ventrical prostate gland in rats, followed by an antitumor efficacy using Dunning R3327-GH prostate carcinomas in intact and castrated rats.A full overview on all clinical trials including bicalutamide would be out of scope.

8.13 Side effects: Bicalutamide was well tolerated in monotherapy as well as in combination. No dose-related increase in adverse events was reported. Adverse events were partially due to pharmacological effects of an anti-androgen, which include gynecomastia, breast tenderness, and hot flushes. Other non-pharmacological adverse events, with incidence equal or higher than 10% were, for example, constipation, nausea, diarrhea, asthenia, pain, and infection. The frequency of non-pharmacological adverse events was in the same range as reported for comparator in clinical trials. In contrast to flutamide, the incidence of diarrhea and liver abnormalities was much lower for bicalutamide. As compared with castration, monotherapy with bicalutamide allowed patients to maintain libido and have better physical capacity, thus resulting in better quality of life.Based on the results of the clinical trials mentioned above, bicalutamide was first approved in 1995. Bicalutamide is indicated for the use in combination with an LHRH-A analogue for metastatic prostate carcinoma (50mg).; View all

8.14 Description: Bicalutamide was launched in the United Kingdom, its first worldwide market, for the treatment of advanced prostate cancer in combination with an LHRH analog or surgical castration. A non-steroidal, peripherally selective antiandrogen, bicalutamide inhibits the action of dihydrotestosterone and testosterone at target sites by competitive binding to the cytosolic androgen receptor. It was reportedly well tolerated with no significant cardiovascular and metabolic side effects due to the benefit of lacking any steroid activity. The efficacy of bicalutamide as a monotherapy has been demonstrated clinically. Promising response rates were also reported in treating colorectal, breast, pancreas and non-small cell lung cancers.

8.15 Originator: Zeneca (United Kingdom)

8.16 Uses: These Secondary Standards are qualified as Certified Reference Materials. These are suitable for use in several analytical applications including but not limited to pharma release testing, pharma method development for qualitative and quantitative analyses, food and beverage quality control testing, and other calibration requirements.

9. Computational chemical data

Molecular Weight: 430.373373g/mol
Molecular Formula: C₁₈H₁₄F₄N₂O₄S
Compound Is Canonicalized: True
XLogP3-AA: 2.3
Exact Mass: 430.06104075
Monoisotopic Mass: 430.06104075
Complexity: 750
Rotatable Bond Count: 5
Hydrogen Bond Donor Count: 2
Hydrogen Bond Acceptor Count: 9
Topological Polar Surface Area: 116
Heavy Atom Count: 29
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 1
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Isotope Atom Count: 0
Covalently-Bonded Unit Count: 1
CACTVS Substructure Key Fingerprint: AAADccB7OcBAAAAAAAAAAAAAAAAAAAAAAAAwYAAAAAAAAAABQAAAHwQQCAAADEyF2BiywYLAAgqYBiVSUHLiAAAhChAIiBlAZIgKoCLgkZGEIAhglAD4yA8QgIAOiAAAQAAQAAAQAACAACAAAAAAAAAAAA==

10. Question & Answer

Is Bicalutamide the same as Casodex? Sep 24 2024
Both BICALUTAMIDE and Enioline are drugs used to treat prostate cancer, but they have differences in mechanisms and indications. Understanding the differences between the two will help patients to be..
Is it safe to consume alcohol while taking BICALUTAMIDE? Sep 24 2024
BICALUTAMIDE is a drug that is commonly used to treat prostate cancer, but its interaction with drinking has aroused the attention of many patients. Understanding the potential risks and influence of..
How does amide work in the body? Sep 24 2024
BICALUTAMIDE is a drug that is widely used in the treatment of prostate cancer. The mechanism of action is essential to understand its therapeutic effect. Before using the drug, please consult a doct..
What are the side effects of BICALUTAMIDE? Sep 24 2024
As a anti -androgen drug, BICALUTAMIDE plays an important role in treating prostate cancer. However, it may also cause some side effects and affect the quality of life of patients. Introduction: What..

11. Recommended Suppliers

Global402SuppliersView all >>

Hangzhou Utanpharma biology co,.Ltd Diamond member

7YRS

Products:Sulindac?Acid?;Roxadustat;Upadacitinib;Relugolix;Moxifloxacin;Ticagrelor;Valsartan;Ivabradine;Fingolimod;Fluvoxamine ;HPMC;PVP;Emagliflozine;D-Cycloserine;D-Proline;L-Proline;L-tert-Leucine
Tel:86-571-87758773
Email:balas@utanpharma.com

Bicaiutamide

Purity:99%Packing: 200kg/bag FOB
Price:
Time: 2024/11/13

Inquire

Hebei Danyue Import and Export Co., Ltd Diamond member

1YR

Products:SLES, LABSA, Polytetrafluoroethylene,and detergent products,cosmetic raw materials
Tel:180-3201-7555
Email:danyue2024@qq.com

Bicalutamide CAS: 90357-06-5

Purity:99%Packing: 200kg/bag FOB
Price: 1.5 USD/kg
Time: 2024/11/15

Inquire

Hebei Mojin Biotechnology Co.,Ltd Diamond member

2YRS

Products:carbomer940,uv627
Tel:86-132-88715308
Email:emma@hbmojin.com

90357-06-5 Bicalutamide CAS 90357-06-5

Purity:99%Packing: 200kg/bag FOB
Price: 10 USD/kg
Time: 2024/11/15

Inquire

Hebei Saisier Technology Co., LTD Diamond member

2YRS

Products:Our company specializes in the research and development of fine chemicals, food additives and pharmaceutical raw materials
Tel:86-17656389-633
Email:Vicky@hbsaisier.cn

Bicalutamide (Subject to patent free)

Purity:99%Packing: 200kg/bag FOB
Price: 300 USD/g
Time: 2024/11/15

Inquire

Jinlan Pharm-Drugs Technology Co., Limited Diamond member

12YRS

Products:Veterinary products,Nutrition products,Agrochemicals,Active pharmaceutical Ingredients,Custom systhesis,Contract manufacturing
Tel:86-571-85829052
Email:market@royalpharms.com

Bicalutamide